Bar schedule
| Mark | Ø (mm) | Length (m) | Qty | Weight (kg) |
|---|
Weights use the standard steel reinforcement formula (diameter² ÷ 162 kg/m) -
a nominal mass calculation, not a substitute for a structural engineer's bar bending
schedule. Always confirm laps, bends and cover with the project's actual RC design.
0
Total bars
0
Total length (m)
0
Total weight (kg)
Rebar bundle, by diameter
Weight share by diameter
| Diameter | Bars | Length (m) | Weight (kg) | Share |
|---|
Grouped straight from the bar schedule - useful for ordering steel by diameter or
sanity-checking which bar size dominates the total tonnage.
Standard bar diameters, at a glance
| Diameter | Nominal mass | Typical use |
|---|
Nominal mass per metre from the standard formula (d² ÷ 162 kg/m). Typical-use
notes are a general guide only - always follow the project's structural drawings and bar
bending schedule for actual bar sizes, spacing and laps.